Product Description
Model NO.: MX Crossflow Film Fill
Ventilation Mode: Natural Ventilation
Air Contact Form: Wet
Tower Shape: Square
Application Fields: Industrial
Condition: New
Trademark: NEWIN
Specification: CE, UL, CTI
HS Code: 8419909000
Cooling Method: Cross Flow
Material: PVC
Air Contact Way: Open
Noise Level: Ultra Low
Certification: ISO, CE, SGS
Application: Replacement Film Fill for Marley
Cooling Tower Transport Package: Wood Packing, 20gp, 40gp Container Loading
Origin: Shenzhen China
Overview
MX Fill is available in MX75 configuration and higher-performing MX625 configuration. MX is a hanging film type
Cooling Tower Fill which spreads the water into a thin film, flowing over large vertical surfaces, promoting maximum exposure to air flow. This type of fill provides much more water surface exposure per cubic foot than splash type fill.
Features
MX Fill is available in MX75 configuration and higher-performing MX625 configuration. MX is a hanging film type cooling tower fill which spreads the water into a thin film, flowing over large vertical surfaces, promoting maximum exposure to air flow. This type of fill provides much more water surface exposure per cubic foot than splash type fill.
MX fill incorporates highly efficient cellular drift eliminators, integrally molded within the fill sheets. Compared with previous designs, these eliminators reduce drift emissions from the tower by a factor of ten or more! Less drift means tower owners save water bills and
Water Treatment chemical expenses.
This fill virtually eliminates the nuisance caused by drift spotting on adjacent buildings and property. For additional savings, the drift eliminators discharge air directly toward the fan. Discharge air, traveling in the right direction when it leaves the eliminators, translates to lower fan horsepower.
Louvers are also integrally molded within the fill sheets preventing water from escaping and assuring precise air distribution throughout wide variations in airflow. Unlike towers equipped with separate external louvers, this fill operates virtually ice-free even in extremely cold weather.
MX fill is thermoformed from PVC with a flame spread rating less than 25 per ASTM E-84 and is considered selfextinguishing. Therefore, the risk of fire damage is minimal.
PVC Plastic sheet(before molding) Physical and mechanical property
No. | Item | symbol | unit | symbol | test method |
1 | density | ρ | g/cm3 | ≤1.55 | GB/T 1033 |
2 | Heat the longitudinal shrinkage rate | S | % | ≤3.0 | |
3 | tensile strength | lengthways | σt | MPa | ≥42.0 | GB/T 13022 |
crosswise | ≥38.0 |
4 | elongation at break | length ways | εt | % | ≥60 | GB/T 13022 |
crosswise | ≥35 |
5 | tear strength | length ways | σtr | kN/m | ≥150 | GB/T 1130 |
crosswise | ≥160 |
6 | Folded in half Coldness Resistance Temperature | ordinary type | tb | ºC | ≤-22 | |
Frigostabile type | ≤-35 |
*7 | Folded in half Coldness Resistance Temperature after hygro thermal aging | ordinary type | tb (W·H) | ºC | ≤-8 | |
Frigostabile type | ≤-18 |
*8 | oxygen index | OI | -- | ≥40 | GB/T 2406 |
Contact us if you need more details on Marley Mx Crossflow Film Fill. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Mx Crossflow Film Fill、
Marley Cooling Tower Infill. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Cooling Tower Spare Parts > Marley Accessories