Find Cooling Tower Fill, Cross Tower Infill, Cooling Tower Film on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.
Home > Products > Cooling Tower Filling > Kingsun Cooling Tower Infill
The Latest Product Alerts Send Me
Kingsun Cooling Tower Infill
  • Kingsun Cooling Tower Infill
Payment Type: L/C, T/T, Western Union
Min. Order: 1
Basic Info

Model No.:  Counter Flow cooling tower

Product Description Model NO.: Counter Flow Cooling Tower Material: PVC or PP or UPVC Condition: New Sheet Spacing: 18mm Applicable Water Temperature: 50ºC ~ -35ºC Minimum Order Quantity: 1000PCS Transport Package: 20/40/40hq Container with Loose Packing Origin: China Cooling Method: Counter Flow or Cross Flow Certification: ISO, CE, SGS, CTI Dimension: 305X1220mm 305xany Sheet Thickness: 0.25-0.45mm Trade Terms: Fob, CIF, CFR, DDU. Trademark: NEWIN Specification: CTI HS Code: 84195000 Features
light weight, strength, good flame retardant performance, corrosion resistance, advanced design, ventilation resistance is small, strong hydrophilicity, large contact area, etc

Dimension: 305x1220mm

Sheet spacing: 18mm
Sheet thickness: 0.25-0.45mm

Applicable water temperature: 50ºC ~ -35ºC

Applicant: Kingsun KFT Counter flow, Square Type, Modular Cell Cooling Tower

Packing and Loading. LCL cargo: wood case / Container Loading:
Trade Terms: FOB, CIF, CFR, DDU.
Payment term: T/T, L/C, West Union
Minimum Order Quantity: 1000pcs

Physical and mechanical property 
PVC Plastic sheet(before molding) Physical and mechanical property Kingsun Cooling Tower Infill    Physical and mechanical property 
PVC Plastic sheet(before molding) Physical and mechanical property 
No. Item symbol unit Index test method
1 density ρ g/cm3 ≤1.55 GB/T 1033
2 Heat the longitudinal shrinkage rate S % ≤3.0  
3 tensile strength lengthways σt MPa ≥42.0 GB/T 13022
crosswise ≥38.0
4 elongation at break lengthways εt % ≥60 GB/T 13022
crosswise ≥35
5 tear strength lengthways σtr kN/m ≥150 GB/T 1130
crosswise ≥160
6 Folded in half Coldness Resistance Temperature  ordinary type tb ºC ≤-22  
Frigostabile type ≤-35
*7 Folded in half Coldness Resistance 
Temperature after hygrothermal aging 
ordinary type tb (W·H) ºC ≤-8  
Frigostabile type ≤-18
*8 oxygen index OI   -- ≥40 GB/T 2406
PVC Plastic sheet(after molding) Physical and mechanical property 
No. Item symbol unit Index test method
1 density ρ g/cm3 ≤1.55 GB/T 1033
2 tensile strength lengthways σt MPa ≥42.0 GB/T 13022
crosswise ≥38.0
3 tear strength lengthways σtr kN/m ≥150 GB/T 1130
crosswise ≥160
4 Folded in half Coldness 
Resistance Temperature
ordinary type tb ºC ≤-8  
Frigostabile type ≤-18
*5 oxygen index OI   -- ≥40 GB/T 2406
Cooling tower plastic parts code and standard
GB/T 1033-1986 plastic density and relative density experiment method
GB/T 1040-1992 plastic tensile performance test methods
GB/T 1633-1979 thermoplastic softening point (d) test method
GB/T 1843-1996 plastic cantilever beam impact test method
GB/T 2406-1993 plastic combustion performance test method, oxidation index
GB/T 13022-1991 plastic film tensile performance test methods

GB/T 1190-1991 plastic rectangular tear performance test methods

Kingsun Cooling Tower Infill

Kingsun Cooling Tower Infill
Kingsun Cooling Tower Infill

Kingsun Cooling Tower Infill

Kingsun Cooling Tower Infill Advantages of Newin Film Fill Media 1. Excellent performance, Film type high cooling efficiency fills media, corrugated shape make water surface is bigger. Packing in 2 ~ 5 layer, between layers there is a hot water redistributed process.   2.Good hydrophilicity, ventilation resistance small surface is rough and the smooth plane packing good hydrophilicity, water bibulous rate is less than 0.015%, make more form a thin film of water, but not splash down, the water and air are more fully contact with the water and air at the same time on the surface flow disturbance.Packing after assembly into the surface wind is a honeycomb diverter, have good uniform wind effect, improve the intensity of heat exchange and stabilize the moisture. 30 ° inclination at the wind inlet direction, effectively reduces the floating water loss. Set up in the end of the packing is according to the impact separation process design of water cleaner, making the drift loss controlled within one over one hundred thousand.   3.Shenzhen Newin Machinery Co., Ltd. produce knob core materials of the production of cooling tower made from high quality PVC PE sheet blister, mainly adopts the trapezoidal wave, wave, S wave type, herringbone corrugated packing, heat dissipation coefficient of large area of growth, water flow distribution on the surface performance is good, water and air flowing through the panel when the advantages of large disturbance.Packing is not easy to deformation, high temperature resistant, anti-aging, and flame retardant performance is good, small wind resistance coefficient.Easy installation, easy to clean, easy to transport the radiator filler used adhesive type and mounted, installation is simple, easy to clean, and successfully solves the adhesive packing deformation due to fouling, self-respect, and the scale is more serious, difficult to clean after deformation.Packing good flame retardant performance, flame retardant oxygen index up to 44.7.   4. Production of Shenzhen Newin Machinery Co., Ltd. Such as, wet cooling tower PVC packing main models are divided into: Round type counter flow Cooling Tower Film fill media, square counter flow cooling tower film fill media, square type cross flow cooling tower film fill media, Industrial Cooling Tower film fill media, Closed Cooling Tower film fill media, evaporate cooling tower film fill media, central air conditioning cooling tower cooling film fill media, PVC sheet, main appearance size is 500 * 650 mm, 500 * 750 mm, 750 * 850 mm, 500 * 850 mm, 500 * 1050 mm, 1050 * 1080 mm, 600 * 1080 mm, 750 * 800 mm, 800 * 400 mm, 1000 * 400 mm, 305 * 1220 mm, 1220 * 1220 mm, 915 * 1220 mm, 1220 * 1220 mm, 1220 * 1000 mm, 915 * 1000 mm, 1000 * 2880 mm, 2880 * 2880 mm, 1000 * 2880 mm, 1330 * 2450 mm ect., The distance between piece and piece is 12-35 mm, sheet thickness of 0.25 ~ 0.25 (+ / - 0.03 mm), quality is about 15 kg per cubic meter of assembly body to 30 kg/m3, the assembly height of 0.6 m - 0.6 m, staggered, for special-shaped pieces of visual field surrounding the tower wall arrangement, cutting and installation according to the actual size.

Contact us if you need more details on Cooling Tower Infill. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Film Filler for Kingsun Cooling Tower、Kingsun Film Media. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Cooling Tower Filling

Email to this supplier
Your message must be between 20-8000 characters